isaiah40 wrote:cairns, can you adjust the kerning on the title a tad?
isaiah40, i can't in coreldraw with that particular font (no paragraph formatting). I'll have to import from another program. what is your objective...do you want the letters spaced a bit more for better eye space?
isaiah40 wrote:cairns, can you adjust the kerning on the title a tad?
isaiah40, i can't in coreldraw with that particular font (no paragraph formatting). I'll have to import from another program. what is your objective...do you want the letters spaced a bit more for better eye space?
Yes please.
Is this suitable? Space across each bar with a gap in the middle?
* Pearl Harbour * Waterloo * Forbidden City * Jamaica * Pot Mosbi
koontz1973 wrote:I asked for that a couple of pages ago and you said no way. What made you change your mind?
koontz1973 wrote:Either put each letter on a separate post so it looks like it has been attached. Something very simple.
But glad you did it. It does look nice.
I'm sorry koontz1973....i was probably caught up in being obstinate with the whole change the font scenario, and didn't want to do it. My bad. Glad you like it though.
* Pearl Harbour * Waterloo * Forbidden City * Jamaica * Pot Mosbi
1. The legend for the terminals BJN, DSH, and TBL have been increased in size to make them more legible on the small map. 2. A small glow has been added to increase the legibility of the legend names only - concern over the illegibility of the Iranian one.
And the glow behind N. Chinese and Japanese is not really making it more readable. Iranian is clear in here.
Thanks for your comments... Large map fixed. Both of those territories are more legible on the large map, but i'll see what can be done next version to increase clarity.
* Pearl Harbour * Waterloo * Forbidden City * Jamaica * Pot Mosbi
What about the solid extrusion trick? Could it help, or is it already there, but not showing much because the N. Chinese and Japanese are directly in front of the vanishing point?
The new spacing on the title sits much better with me. It makes the title look part of the map now.
I have noticed that 'S.E. Asian' drop shadow in the legends seem to be a few pixels lower than any of its counterparts, I am guessing this isn't intentional?
Finally, I also noticed that the poles behind the title are flat. I am guessing they are suppose to represent a cylindrical pole shape? If so a quick gradient to shade and round them wouldn't hurt, just to give them a 3D touch like the other cylindrical shapes on your map.
Apart from those I will be happy to stamp this once all other graphical discussion is concluded.
ender516 wrote:What about the solid extrusion trick? Could it help, or is it already there, but not showing much because the N. Chinese and Japanese are directly in front of the vanishing point?
NO ender516, i tried that the other day when i was adjusting the glow behind the names. It only makes the legibility of the words much worse because the increment of extrusion is only whole numbers and not decimals.
* Pearl Harbour * Waterloo * Forbidden City * Jamaica * Pot Mosbi
gimil wrote:The new spacing on the title sits much better with me. It makes the title look part of the map now.
Good
I have noticed that 'S.E. Asian' drop shadow in the legends seem to be a few pixels lower than any of its counterparts, I am guessing this isn't intentional?
Fixed
Finally, I also noticed that the poles behind the title are flat. I am guessing they are suppose to represent a cylindrical pole shape? If so a quick gradient to shade and round them wouldn't hurt, just to give them a 3D touch like the other cylindrical shapes on your map.
no, those are meant to be flat, like flat supports with glass in between them.
Apart from those I will be happy to stamp this once all other graphical discussion is concluded.
Thank you.
* Pearl Harbour * Waterloo * Forbidden City * Jamaica * Pot Mosbi
no, those are meant to be flat, like flat supports with glass in between them.
Got you. As a final suggestion how about another line following where the glass would meet the ceiling. Just to get a feel that there is glass there. Something like this?
Really gimil, next you'll want nuts and bolts, but if it makes you happy then i'll put it in the next version, but really i'd prefer not to as the edges of the steel posts should tell enough of the story...imagination is wonderful when one has something to imagine.
* Pearl Harbour * Waterloo * Forbidden City * Jamaica * Pot Mosbi
cairnswk wrote:Really gimil, next you'll want nuts and bolts, but if it makes you happy then i'll put it in the next version, but really i'd prefer not to as the edges of the steel posts should tell enough of the story...imagination is wonderful when one has something to imagine.
Well to me the steel posts don't. You have earned your stamp but I feel your attitude has been a little poor lately after 28 quenched maps (many that I have contributed to) you would of known that I am only making suggestions to help make your map better.
cairnswk wrote:Really gimil, next you'll want nuts and bolts, but if it makes you happy then i'll put it in the next version, but really i'd prefer not to as the edges of the steel posts should tell enough of the story...imagination is wonderful when one has something to imagine.
Well to me the steel posts don't. You have earned your stamp but I feel your attitude has been a little poor lately after 28 quenched maps (many that I have contributed to) you would of known that I am only making suggestions to help make your map better.
Have a nice day.
Thank you gimil, you too have a nice day.
* Pearl Harbour * Waterloo * Forbidden City * Jamaica * Pot Mosbi
Version 25 1. Gimil's glass line has been added. 2. i wanted to put some asian gargloyle on the tops of those floors, but after adding them, it looked unconvincing, so i dropped them and made a small steam engine stencil and added that to the roof line fronts to break up those long pieces of nothingness and i think it works well. Of course it is not blantantly obvious what they are, and these probably show better in .pngs, but they are meant to be totally subtle almost like all those character one would see on the front of asian buildings.
Small Large [bigimg]http://i155.photobucket.com/albums/s282/cairnswk/RAIL%20ASIA/_rail_asia_V25L.png[/bigimg] Neutrals
Last edited by cairnswk on Fri Feb 03, 2012 12:14 pm, edited 3 times in total.
* Pearl Harbour * Waterloo * Forbidden City * Jamaica * Pot Mosbi
The above version 25 has been updated.... 1. There is an opacity at 80% layer across the station and sundry items, hopefully to make the map stand out slightly more; this layer sits under the title and legend text, very subtle but it is there. I always intended to have this layer, and is the same effect applied to Rail Africa map, although more apparent on that map. 2. the above images are converted to pngs, with the addition of the neutral map also on the front page for reference.
* Pearl Harbour * Waterloo * Forbidden City * Jamaica * Pot Mosbi
SMO - Smolensk? (Yes) NOV - Novgorod AQT - Aqtau NIK - Nikolskiy SKD - Samarkand (could this be a problem with SDK in Indonesia? LHS - Lhasa GLM - Golmud (start of branch line to Lhasa) LHW - Lanzhou DHK - Dhaka (Bangladesh) KUL - Kuala Lumpur BAQ = Balqash KER - Kerman KRY = Karymskoye
* Pearl Harbour * Waterloo * Forbidden City * Jamaica * Pot Mosbi
sorry, gilligan i hadf to get up from this desk for a while and walk.
Taishet should be Tayshet
Actually we can't change Samarkand from SKD re my discussion bak here viewtopic.php?f=64&t=101474&start=180#p3482238 and SDK is the officail code for Sandakan in Indonesia, so leave them as be, at least they are in two different continents and notated as such, and they are miles apart.
* Pearl Harbour * Waterloo * Forbidden City * Jamaica * Pot Mosbi
